Ecological wood gasification boiler Atmos DC 18 GD (Generator Dokogen). High efficiency 90,3 %. Ecological burning. Operating power 19 kW. Large fuel container = large pieces of wood. High quality.
Warning: Last items in stock!
Ecological wood gasification boilers Generator Dokogen boilers are characterized with a special chamber which is on both sides laid with special ceramic shaped parts, with primary air inlets in the lower section and with ceramic nozzle and in lower chamber with spherical ceramic parts. Rear flue duct is equipped with a tubular heat exchanger.
Gasification of wood (inverse burning) with subsequent combustion of wood gas in ceramic combustion chamber ensures optimum burning of all combustible components. The air supply and combustion process are controlled with exhaust fan. This allows quick ignition and good combustion of the boiler since the firing up. The flame temperature is 1000 - 1250 °C.
Inverse burning (gasification) and ceramic combustion chamber enable practically complete combustion with a minimum of harmful exhalations. The boilers meet limits of European regulations for environmental friendly product and belong to 5th class of boiler standard ČSN EN 303-5. Meet the most demanding requirements of the EU - ECODESIGN 2015/1189.
Boiler output: 18 kW
Specified chimney draught: 16 Pa
Height: 1281 mm
Width: 680 mm
Depth: 830 mm
Boiler weight: 376 kg
Boiler water volume: 73 l
Fuel chamber volume: 85 dm3
Maximum wood length: 330 mm
Boiler efficiency: 90,3 %
Flue gas temperature at nominal output: 145 °C
Specified fuel: Dry wood with heating capacity 15 - 17 MJ.kg1, water content at least 12 % - max. 20 %, average 80 - 150 mm
Min. return water temperature: 65 °C
Boiler class: 5
|1. Boiler body
2. Filling door (upper)
3. Ash-pan door (lower)
4. Exhaust fan (S)
5. Heatproof shaped piece - nozzle
6. Control panel
7. Safety thermostat
8. Regulating flap
9. Heat proof shaped piece – for type GD - combustion area side
10. Heat proof shaped piece – for type GD - spherical space
11. Sealing – nozzle - 12 x 12 (14 x 14)
12. Heatproof shaped piece – half moon
13. Ignition valve
14. Heat proof shaped piece – for type GD - rear face of spherical space
|15. Cleaning lid
17. Ignition valve pulling rod
19. Intake duct - air duct
20. Main switch
22. Draught regulator - Honeywell FR 124
23. Cooling loop protecting against overheating
24. Ventilator control thermostat (boiler)
25. Door filling - Sibral
26. Door sealing – cord 18 x 18
27. Flue gas thermostat
30. Capacitor of exhaust fan
33. Flue gas brake (Turbulator)
A - 1435 mm
B - 1120 mm
C - 680 mm
D - 1095 mm
E - 150/152 mm
F - 78 mm
G - 185 mm
H - 1152 mm
CH - 256 mm
I - 256 mm
J - 2"
Electrical - mechanical - output of the boiler is controlled with a regulating air flap operated with the draught regulator, FR 124 type, which automatically opens or closes the safety valve according to a set output temperature of water (80 - 90°C). When setting the power regulator, much attention should be paid because the regulator has another important function other than power regulation - it also secures the boiler against overheating. A controlling thermostat located on the boiler panel regulates the exhaust fan according to a set temperature (80 - 85°C). A temperature lower by 5°C should be set on the controlling thermostat rather than on the FR 124 draught regulator.
Boilers are also equipped with the waste gas thermostat which serves to switch off the exhaust fan after the wood burns out.
The boiler runs at a reduced output even without a fan - heating is not lost when the electric power fails. At up to 70 % of its rated output, the boiler can be operated without a ventilator.