Pellet hoppers

Services

Manufacturers

Capacitive level switch CLS - 53N

CLS53N

New product

Capacitive level switch CLS - 53N for pellet hopper

More details

164,95 € tax incl.

More info

  • For limit level sensing of bulk-solid, fragmental and extruded materials
  • Simple sensitivity setting by means of magnetic pen
  • Two or three-wire connections directly to the relay circuit or PLC logic unit
  • Wide range of supply voltage up to 230 V AC/DC (CLS–53N–SAC)
  • Optical indication by LED

 

The capacitive level switch CLS® is designed for limit (2-state) level sensing of bulk-solid materials (pellets, wooden chips, cereals, granulates, etc.) in hoppers, containers, silos, etc.

The sensor output is equipped with electronic switch. The sensitivity and output mode (normally open / closed) can be simply set by attaching a magnetic pen to the sensitive spot on the sensor housing.

 

FEATURES OF VARIANTS:

  • CLS – 53N –SAC
    2-wire connection with electronic current switch directly connected to the relay circuit. Supply voltage up to 230 V AC/DC. The sensor is not suitable for direct connection to a binary input of the control system.

  • CLS – 53N –P(N)
    3-wire connection with NPN or PNP output for connected to Dinel supply and switching units or binary input of PLC.

 

TECHNICAL SPECIFICATION
Supply voltage

CLS–53N–SAC  20 ... 230 VAC/DC ±10%50 ... 60 Hz

CLS–53N–P(N) 7 ... 36 V DC
Switched current

CLS–53N–SAC min. 4 mA / max. 300 mA
CLS–53N–P(N) max. 200 mA
Supply current OFF state
CLS–53N–SAC 1.7 mA
CLS–53N–P(N) 9.0 mA
Output setting O / C
Max. remanent CLS–53N–SAC max. 6.0 V

voltage - ON state CLS–53N–P(N) max. 1.5 V
Max. switching frequency 0.5 Hz
Ambient temperature range -20 ... +60°C
Protection class IP65
Connection cable type 3 x 1.5 mm2
Housing material PP and PVC-U
Weight approx. 130 g