REGULUS spol. s r.o. Heating system components, solar water heating, controllers, thermostats, measurementm etc
Stainless-steel anchor for pantiles
Solarten super, 10 l packing. Antifreeze fluid for Regulus Solar Collectors.
Solarten super, 25 l packing. Antifreeze fluid for Regulus Solar Collectors. Freezing point -28 °C, max. working temperature +230 °C (up to 2,5 MPa), short overheat +300 °C
Ball valve for solar systems, G 3/8" M/F, up to 160°C, under an air vent valve
Encased adjustable capillary thermostat, 0-300 °C, 2 m capillary, INOX sensor, IP 40. BY ORDERING
Connection kit for flat plate solar collector array 1 KPG1 (KPC1, KPA1, KPS11 and KPH1).
Encased adjustable contact thermostat, 20-90°C, heat conducting paste incl.
Electric-controlled combustion air regulator for solid-fuel boilers. It controls the working fluid flow temperature from a heat source to a value set by the knob.
Encased adjustable capillary thermostat, 0-90°C, 1 m capillary, IP 40, Regulus
Vacuum insulation in glass tubes. Two concentric glass tubes are used, with vacuum between them. The ends of the tubes are sealed so the vacuum is guaranteed for a long time.
REGULUS Flat Plate Solar Collectors are designed for solar domestic hot water heating (DHW), backup- and pool heating with solar energy. Solar radiation penetrates the glass and is intercepted by an efﬁ cient absorption layer applied on an all aluminum absorber.
Heating coil surface area: 3,6 m² (sqm), Regulus. 10 bar, 95 °C