Atmos
Click for more products.
No produts were found.

Atmos

  • Atmos wood gasification boilers

    Atmos wood gasification boilers

    <p>Atmos wood gasification boilers are constructed for burning wood on the principle of generator gasifying with the use of a gas exhaust ventilator (S), which withdraws the combustion gases from the boiler, or leads air into the boiler. <br />The boiler body is produced as a weldment of 3 - 8 mm steel sheets. They comprise the fuel hopper, which is equipped at the bottom with a heatproof pipe fitting with longitudinal hole for the combustion gases and passage of gases. The burnout part of the multiple chamber furnace under the fuel hopper is equipped with ceramic pipe fittings. There is a vertical combustion gas duct in the back of the boiler body, which is equipped with a heating valve in the upper section. The upper part of the combustion gas duct is fitted with a gas exhaust outlet for connection to a chimney.</p>
  • Atmos pellet boilers

    Atmos pellet boilers

  • Atmos combi boilers

    Atmos combi boilers

    <p>Gasification boilers <span class="h3"></span>DC25S, DC32S, DC40SX <span class="h3"></span>with a pellet burner built-in in the upper door are a brilliant solution for those who want to fully combine manual burning of solid fuels and automatic burning of pellet.</p> <p>Combined boilers ATMOS DC18SP, DC25SP, DC32SP enable to burn wood on the principle of generator gasification in combination with a burner for pellets (DCxxSP - code: H0048). The boiler enables changing of fuels heating with wood and full automatic heating with pellets. If needed there is naturally the option to buy a boiler without a burner and select one later or to use a burner from the last boiler.</p> <p>The boiler is constructed as a body of three chambers situated one above another. The two upper chambers serve for the gasification of the wood as you are familiar with from the classical gasification boilers that we produce as the standard. In the third lowest chamber is installed the required burner at the front and inlaid by ceramics to ensure the optimal quality of burning. Both the systems are separated by a water surface so that they do not interfere with each other and thanks to that the boiler achieves high efficacy when heating by the individual fuels. The combustion gases exhaustion is handled by one outlet and therefore only one chimney is needed.</p>
  • Atmos accessories and spare parts

    Atmos accessories and spare parts

Settings

Menu

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in