The KIPI pellet burner operates automatically and does not require supervision. The rotating combustion tube prevents the accumulation of slag and other combustion residues inside the combustion tube during operation. While the burner is operating, the combustion tube rotates cyclically, allowing ash and slag to be discharged from the combustion tube.
The pellet burner is designed for installation in solid fuel boilers, pellet boilers, as well as various gas and oil boilers whose combustion chamber is sufficiently large to allow combustion ash to accumulate at the bottom.
The pellet burner is an environmentally friendly device, as it uses renewable energy sources as fuel. In addition, the burner has low electrical power consumption.
The pellet burner is equipped with a control unit that ensures optimal operation based on the operating mode and parameters set by the user. The automation system can be connected to a room temperature sensor and an outdoor temperature sensor. Boiler and domestic hot water sensors are included as standard. The control unit also allows control of the heating system pumps, domestic hot water pumps, and the boiler mixing unit.
The burner is equipped with safety automation that blocks fuel supply in the event of overheating or flame control failure. In the event of a power outage, fuel supply is automatically stopped, preventing damage to the burner and other equipment.
Only pellets with a diameter of ⌀ 6–8 mm and a length of 3.15–40 mm may be used as fuel.
By ordering an optional accessory, it is possible to monitor and adjust burner operation remotely via the internet (provided the customer has an internet connection).
Pellet auger conveyor 2 m, with inspection window, two-piece, KIPI.
The auger conveyor is suitable for burners up to 50 kW.
Length: 2 m
Motor power: 50 kW
