The KIPI pellet burner operates fully automatically and does not require supervision. The rotating combustion tube prevents the accumulation of slag and other combustion residues during operation. While the burner is operating, the combustion tube rotates cyclically, allowing ash and slag to be removed from the combustion chamber.
The pellet burner is designed for installation on solid fuel boilers, pellet boilers, as well as various gas and oil boilers whose combustion chamber is large enough to allow ash to accumulate at the bottom.
The pellet burner is an environmentally friendly device, as it uses renewable energy sources as fuel. It also has low electrical power consumption.
The burner is equipped with a touch-screen control unit that ensures optimal operation based on the operating mode and parameters set by the user. The automation can be connected to a room temperature sensor and an outdoor temperature sensor. Boiler and domestic hot water sensors are included as standard. The controller also allows control of heating system pumps, domestic hot water pumps, and the boiler mixing valve.
The burner is equipped with safety automation that blocks fuel feeding in the event of overheating or flame control failure. In the event of a power outage, fuel feeding stops automatically, preventing damage to the burner and other equipment.
Only pellets with a diameter of ⌀ 6–8 mm and a length of 3.15–40 mm may be used as fuel.
When optional equipment is ordered, it is possible to monitor and adjust the burner remotely via the internet (if the customer has an internet connection).
Technical data – KIPI 5–20 kW pellet burner
-
Power output: 5–20 kW
-
Power supply: 230 VAC, 50 Hz (6 A)
-
Average power consumption: 24 W
-
Ignition element power: 150 W
-
Fuel: pellets ⌀ 6–8 mm, length 3.15–40 mm
-
Modulating power control
-
No primary or secondary air adjustment (preset for burning wood pellets)
-
Central heating pump control
-
Domestic hot water pump control
-
Room thermostat control
-
Outdoor temperature control (optional)
-
Controller: EcoMAX 920
-
Recommended chimney draft: 10–20 Pa
Dimensions – KIPI 5–20 kW pellet burner
-
Combustion chamber diameter (SP): ⌀ 93.6 mm
-
Installation opening diameter (SZ): ⌀ 114.3 mm
-
Combustion chamber length (A): 183 mm
Pellet screw conveyor KIPI, 2 m, with inspection window, two-piece
Suitable for burners up to 50 kW.
-
Length: 2 m
-
Motor power: 50 kW
