The KIPI pellet burner operates automatically and does not require supervision. The rotating combustion tube prevents the accumulation of slag and other combustion residues inside the combustion tube during operation. While the burner is operating, the combustion tube rotates cyclically, causing ash and slag to be discharged from the combustion tube.
The pellet burner is designed for installation in solid fuel boilers, pellet boilers, as well as various gas and oil boilers whose combustion chamber is sufficiently large to allow combustion ash to accumulate at the bottom.
The pellet burner is an environmentally friendly device, as it uses renewable energy sources as fuel. In addition, the burner has low electrical power consumption.
The pellet burner is equipped with a control unit that ensures optimal burner operation based on the operating mode and parameters set by the user. The automation system can be connected to a room temperature sensor and an outdoor temperature sensor. Boiler and domestic hot water sensors are included as standard. The control unit also allows control of the heating system pumps, domestic hot water pumps, and the boiler mixing valve.
The burner is equipped with safety automation that blocks fuel supply in case of overheating or flame control failure. In the event of a power outage, fuel supply is automatically stopped, preventing damage to the burner and other equipment.
Only pellets with a diameter of ⌀ 6–8 mm and a length of 3.15–40 mm may be used as fuel.
By ordering an additional module, it is possible to monitor and adjust burner operation remotely via the internet (provided the customer has an internet connection).
KIPI Pellet Burner 6–26 kW – Technical Data
Power output: 6–26 kW
Power supply: 230 VAC, 50 Hz (6 A)
Average power consumption: 25 W
Ignition element power: 150 W
Fuel: pellets ⌀ 6–8 mm, length 3.15–40 mm
Modulating power control
Primary and secondary air adjustment not available (preset for wood pellets)
Central heating pump control
Domestic hot water pump control
Room thermostat control
Outdoor temperature-based control (optional)
Controller: EM 820 P
Recommended chimney draft: 10–20 Pa
KIPI Pellet Burner 6–26 kW – Dimensions
Combustion chamber diameter (SP): ⌀ 100 mm
Installation opening diameter (SZ): ⌀ 129 mm
Combustion chamber length (A): 207 mm
KIPI Pellet Burner – Components (Burner, Auger and Hopper)
-
Rotating combustion tube
-
Outer combustion chamber tube
-
Thermal insulation (not included)
-
Bearing between air chamber and combustion chamber
-
Air chamber
-
Pellet feed pipe
-
Pellet feed hose (fusible)
-
Auger conveyor (not included)
-
Pellet hopper (not included)
-
Fan
-
Combustion tube rotation mechanism
-
Internal pellet auger
-
Ignition element
Pellet auger conveyor 2 m, with inspection window, two-piece, KIPI.
The auger conveyor is suitable for burners up to 50 kW.
Length: 2 m
Motor power: 50 kW
