Burner set with ecoMAX 920 NTC control unit 6–26 kW, with touch screen + 2 m pellet screw conveyor up to 50 kW, two-piece, KIPI

The KIPI pellet burner operates automatically and does not require supervision. The rotating combustion tube prevents the accumulation of slag and other combustion residues during operation. While the burner is operating, the combustion tube rotates cyclically, allowing ash and slag to be removed from the combustion chamber.

The pellet burner is designed for installation on solid fuel boilers, pellet boilers, as well as various gas and oil boilers with a combustion chamber large enough to allow ash to collect at the bottom.

The pellet burner is environmentally friendly, as it uses renewable energy sources as fuel. It also features low electrical power consumption.

The burner is equipped with a touch-screen control unit that ensures optimal operation based on user-defined operating modes and parameters. The automation can be connected to a room temperature sensor and an outdoor temperature sensor. Boiler and domestic hot water sensors are included as standard. The controller allows control of heating system pumps, domestic hot water pumps, and the boiler mixing valve.

The burner is equipped with safety automation that blocks fuel supply in the event of overheating or flame detection failure. In the event of a power outage, fuel supply stops automatically, preventing damage to the burner and other equipment.

Only pellets with a diameter of ⌀ 6–8 mm and a length of 3.15–40 mm may be used as fuel.

When optional equipment is ordered, the burner can be monitored and adjusted remotely via the internet (if an internet connection is available).

Technical data – KIPI 6–26 kW pellet burner

• Output power: 6–26 kW

• Power supply: 230 VAC, 50 Hz (6 A)

• Average power consumption: 25 W

• Ignition element power: 150 W

• Fuel: pellets ⌀ 6–8 mm, length 3.15–40 mm

• Modulating power control

• No primary or secondary air adjustment (preset for wood pellets)

• Central heating pump control

• Domestic hot water pump control

• Room thermostat control

• Outdoor temperature-based control (optional)

• Controller: EM 820 P

• Recommended chimney draft: 10–20 Pa

Dimensions – KIPI 6–26 kW pellet burner

• Combustion chamber diameter (SP): ⌀ 100 mm

• Installation opening diameter (SZ): ⌀ 129 mm

• Combustion chamber length (A): 207 mm

KIPI pellet burner, screw conveyor and hopper

1. Rotating combustion tube

2. Outer combustion chamber tube

3. Thermal insulation (not included)

4. Bearing between air chamber and combustion chamber

5. Air chamber

6. Pellet feed pipe

7. Meltable pellet feed hose

8. Screw conveyor (not included)

9. Pellet hopper (not included)

10. Fan

11. Combustion tube rotation mechanism

12. Internal pellet screw

13. Ignition element

Pellet screw conveyor KIPI, 2 m

Suitable for burners up to 50 kW.

• Length: 2 m

• Motor power: 50 kW